// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at

//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Matter Manager
#include <Matter.h>
#if !CONFIG_ENABLE_CHIPOBLE
// if the device can be commissioned using BLE, WiFi is not used - save flash space
#include <WiFi.h>
#endif

// List of Matter Endpoints for this Node
// On/Off Light Endpoint
MatterOnOffLight OnOffLight;

// CONFIG_ENABLE_CHIPOBLE is enabled when BLE is used to commission the Matter Network
#if !CONFIG_ENABLE_CHIPOBLE
// WiFi is manually set and started
const char *ssid = "your-ssid";          // Change this to your WiFi SSID
const char *password = "your-password";  // Change this to your WiFi password
#endif

void setup() {
  Serial.begin(115200);

// CONFIG_ENABLE_CHIPOBLE is enabled when BLE is used to commission the Matter Network
#if !CONFIG_ENABLE_CHIPOBLE
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("\r\nWiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
  delay(500);
#endif

  // Initialize at least one Matter EndPoint
  OnOffLight.begin();

  // Matter beginning - Last step, after all EndPoints are initialized
  Matter.begin();
}

void loop() {
  // Check Matter Commissioning state
  if (!Matter.isDeviceCommissioned()) {
    Serial.println("");
    Serial.println("Matter Node is not commissioned yet.");
    Serial.println("Initiate the device discovery in your Matter environment.");
    Serial.println("Commission it to your Matter hub with the manual pairing code or QR code");
    Serial.printf("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
    Serial.printf("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
    // waits for Matter Light Commissioning.
    while (!Matter.isDeviceCommissioned()) {
      delay(5000);
      Serial.println("Matter Fabric not commissioned yet. Waiting for commissioning.");
    }
  }
  Serial.println("Matter Node is commissioned and connected to the network.");
  Serial.println("====> Decommissioning in 30 seconds. <====");
  delay(30000);
  Matter.decommission();
  Serial.println("Matter Node is decommissioned. Commsssioning widget shall start over.");
}