MeshTalos-Client/managed_components/espressif__arduino-esp32/libraries/WiFiProv/examples/WiFiProv

Provisioning for Arduino

This sketch implements provisioning using various IDF components.

Description

This example allows Arduino users to choose either BLE or SOFTAP as the mode of transport for provisioning-related communication between the device (to be provisioned) and the client (owner of the device).

APIs introduced for provisioning

WiFi.onEvent()

This API can be used to register a function to be called from another thread for Wi-Fi Events and Provisioning Events.

WiFi.beginProvision()

WiFi.beginProvision(void (*scheme_cb)(), wifi_prov_scheme_event_handler_t scheme_event_handler, wifi_prov_security_t security, char *pop, char *service_name, char *service_key, uint8_t *uuid);

Parameters passed

• Function pointer: Choose the mode of transfer

  • provSchemeBLE - Using BLE
  • provSchemeSoftAP - Using SoftAP

• security: Choose the security type

  • WIFI_PROV_SECURITY_1 - Enables secure communication with a secure handshake using key exchange and proof of possession (pop), and encryption/decryption of messages.
  • WIFI_PROV_SECURITY_0 - Does not provide application-level security, allowing plain text communication.

• scheme_event_handler: Specify the handlers according to the chosen mode

  • BLE:

    • WIFI_PROV_SCHEME_BLE_EVENT_HANDLER_FREE_BTDM - Used when the application doesn't need BT and BLE after provisioning is finished.
    • WIFI_PROV_SCHEME_BLE_EVENT_HANDLER_FREE_BLE - Used when the application doesn't need BLE to be active after provisioning is finished.
    • WIFI_PROV_SCHEME_BLE_EVENT_HANDLER_FREE_BT - Used when the application doesn't need BT to be active after provisioning is finished.

  • SoftAP:

    • WIFI_PROV_EVENT_HANDLER_NONE

• pop: String used for authentication.

• service_name: Specify the service name for the device. If not specified, the default chosen name is PROV_XXX, where XXX represents the last 3 bytes of the MAC address.

• service_key: Specify the service key. If the chosen mode of provisioning is BLE, the service_key is always NULL.

• uuid: Users can specify their own 128-bit UUID while provisioning using BLE. If not specified, the default value is:

{ 0xb4, 0xdf, 0x5a, 0x1c, 0x3f, 0x6b, 0xf4, 0xbf, 0xea, 0x4a, 0x82, 0x03, 0x04, 0x90, 0x1a, 0x02 }

• reset_provisioned: Resets previously provisioned data before initializing. Using this prevents problem when the device automatically connects to previously connected Wi-Fi and therefore cannot be found.

NOTE: If none of the parameters are specified in beginProvision, default provisioning takes place using SoftAP with the following settings:

• scheme = WIFI_PROV_SCHEME_SOFTAP
• scheme_event_handler = WIFI_PROV_EVENT_HANDLER_NONE
• security = WIFI_PROV_SECURITY_1
• pop = "abcd1234"
• service_name = "PROV_XXX"
• service_key = NULL
• uuid = NULL
• reset_provisioned = false

Flashing

This sketch takes up a lot of space for the app and may not be able to flash with default setting on some chips. If you see Error like this: "Sketch too big" In Arduino IDE go to: Tools > Partition scheme > chose anything that has more than 1.4 MB APP for example No OTA (2MB APP/2MB SPIFFS)

Log Output

• To enable debugging: Go to Tools -> Core Debug Level -> Info.

Provisioning Tools

Provisioning Tools

Example Output

Provisioning using SoftAP

[I][WiFiProv.cpp:117] beginProvision(): Starting AP using SOFTAP
 service_name: PROV_XXX
 password: 123456789
 pop: abcd1234

Provisioning started
Give Credentials of your access point using "Android app"

Received Wi-Fi credentials
    SSID: GIONEE M2
    Password: 123456789

Connected IP address: 192.168.43.120
Provisioning Successful
Provisioning Ends

Provisioning using BLE

[I][WiFiProv.cpp:115] beginProvision(): Starting AP using BLE
 service_name: PROV_XXX
 pop: abcd1234

Provisioning started
Give Credentials of your access point using "Android app"

Received Wi-Fi credentials
    SSID: GIONEE M2
    Password: 123456789

Connected IP address: 192.168.43.120
Provisioning Successful
Provisioning Ends

Credentials are available on the device

[I][WiFiProv.cpp:146] beginProvision(): Already Provisioned, starting Wi-Fi STA
[I][WiFiProv.cpp:150] beginProvision(): SSID: Wce*****
[I][WiFiProv.cpp:152] beginProvision(): CONNECTING TO THE ACCESS POINT:
Connected IP address: 192.168.43.120